Rawlplug United Kingdom

Hammer-in facade fixing 60mm long expansion zone for high performance in masonry, as well as lightweight and aerated concrete

Easy installation with best performance in lightweight base materials
Approved for use in base material categories B, C, D, and E
Steel nail allows fast and trouble-free installation with correct expansion of the plug.
Reduction of thermal bridge formation (value 0.3W/K) through the integration of an impact-resistant plastic overmoulding on the nail head.
Plate stiffness (value 0.5 kN/mm) ensures smooth elevation surface and stable insulation system.
Can be used with additional KWL insulation holding plate, available in 90, 110 and 140mm flange sizes.

Drill a hole of required diameter and depth
Drilling depth of min 80mm in approved materials.
Lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached
Embedment depth of min 60mm in approved materials.
Hammer the steel nail into the plastic sleeve until fixing is secure and flush with insulation material.
In soft insulation panels the fixing should be combined with insulation retaining plates KWL-90, KWL-110, KWL-140.
Temperature range when installed -35C to +80C.

Need documents for other product? Visit our Technical Library.

go to library

Something went wrong... Please try again.

Your request will be sent to our sales department. Please note this is not a purchase order.