Something went wrong... Please try again.
R-BRUSH Manual Wire Brushes
Brush accessory for cleaning out holes prior to anchor installation
Features and benefits
- Ideal for cleaning dust from drilled holes prior to applying bonded anchors or installing mechanical anchors
- Hole cleaning is necessary for correct loads
- Suitable for variable anchor embedment depths.
- Suitable for repetitive and frequent use.
Product information
Product Code |
Drill diameter |
Stud size |
Diameter |
D | |||
[mm] |
- |
[mm] |
|
R-BRUSH-M08/M |
10 |
M8 |
12 |
R-BRUSH-M10/M |
12 |
M10 |
14 |
R-BRUSH-M12/M |
14 |
M12 |
16 |
R-BRUSH-M16/M |
18 |
M16 |
20 |
R-BRUSH-M20/M |
24 |
M20 |
26 |
R-BRUSH-M24/M |
28 |
M24 |
30 |
R-BRUSH-M30/M |
35 |
M30 |
37 |
Installation guide
- Drill hole to the required diameter and depth for stud size being used.
- Before inserting anchor, clean inside of hole by commpresed air starting from the drill holle botton. Blow the hole at least twice by compressed air at minimum 6 bar.
- Choose extensions and brushes to the selected depth and diameter of the hole, then combine them into one set.
- Connect the drill set with the SDS tip.
- Clean the hole twice with a prepared brush set.
- Clean the hole again with compressed air.
Contact us to get information about product availability and its price