Something went wrong... Please try again.
R-HAC-V Hammer-In with Threaded Rods
Heavy duty anchor with small spacing and edge distances, simply installed by hammering the threaded rods
Features and benefits
- High performance anchor, for use in safety critical applications
- The system relies on the adhesion between concrete and resin, which is free from expansion forces. This makes it an ideal choice where close edge and spacing distances are required
- Capsule contains precise amounts of ingredients making it a very consistent product
- Adhesive bond strength is not affected by unpolluted water
- Suitable for dry or wet non-cracked concrete
- Low cost tooling required for installation, quick and easy to install
- Styrene free - virtually odourless
- Approved for use with threaded rods in non-cracked concrete (ETAG001 Option 7)
Product information
Product Code |
Description / Resin Type |
R-HAC-V-08 |
Styrene Free Vinylester Resin |
R-HAC-V-10 |
Styrene Free Vinylester Resin |
R-HAC-V-12 |
Styrene Free Vinylester Resin |
R-HAC-V-16 |
Styrene Free Vinylester Resin |
R-HAC-V-20 |
Styrene Free Vinylester Resin |
R-HAC-V-24 |
Styrene Free Vinylester Resin |
R-HAC-V-30 |
Styrene Free Vinylester Resin |
Base material
-
Non-cracked concrete C20/25-C50/60
For use also with
-
Natural Stone (after site testing)
Applications
- Balustrading & handrails
- Cable trays
- Guard rails
- Heavy machinery
- Threaded rods
- Cladding restraints
- Curtain walling
- Fencing & gates manufacturing and installation
- Reinforcement bars
Installation guide
- Drill hole to the required diameter and depth for stud size being used.
- Clean the hole thoroughly with brush and hand pump at least four times before installation.
- Insert capsule into the hole.
- The stud is simply hammered through the capsule using a manual or mechanical hammer (M16-M30).
- Leave the anchor undisturbed unitl the curing time elapses.
- Attach fixture and tighten the nut to the required torque.
Installation data
R-STUDS
Size |
M8 |
M10 |
M12 |
M16 |
M20 |
M24 |
M30 |
||
Thread diameter |
d |
[mm] |
8 |
10 |
12 |
16 |
20 |
24 |
30 |
Hole diameter in substrate |
d0 |
[mm] |
10 |
12 |
14 |
18 |
24 |
28 |
35 |
Capsule size |
[mm] |
8 |
10 |
12 |
16 |
20 |
24 |
30 |
|
Capsule diameter |
dc |
[mm] |
9.25 |
10.75 |
12.65 |
16.75 |
21.55 |
23.75 |
33.2 |
Installation torque |
Tinst |
[Nm] |
10 |
20 |
40 |
80 |
120 |
180 |
300 |
Min. hole depth in substrate |
h0 |
[mm] |
hnom + 5 |
hnom + 5 |
hnom + 5 |
hnom + 5 |
hnom + 5 |
hnom + 5 |
hnom + 5 |
Min. installation depth |
hnom |
[mm] |
80 |
90 |
110 |
125 |
170 |
210 |
270 |
Min. substrate thickness |
hmin |
[mm] |
120 |
130 |
140 |
180 |
230 |
270 |
340 |
Min. spacing |
smin |
[mm] |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
Min. edge distance |
cmin |
[mm] |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
0.5 * hnom ≥ 40 |
Minimum working and curing time
Resin temperature |
Concrete temperature |
Curing time* |
Working time |
[°C] |
[°C] |
[min] |
[min] |
5 |
-5 |
1440 |
- |
5 |
0 |
840 |
- |
5 |
5 |
240 |
- |
10 |
10 |
180 |
- |
15 |
15 |
90 |
- |
20 |
20 |
45 |
- |
25 |
30 |
20 |
- |
25 |
40 |
10 |
- |
Downloads
- R-HAC-V Hammer-In with Threaded Rods - Technical Data Sheet
- 1488-CPR-0607_W R-HAC-V _EN.pdf
- ETAs 11_0002 R-HAC-V EN.pdf
- UKTA_R-HAC-V_0836-22-6100_2022_EN.pdf
Need documents for other product? Visit our Technical Library.
go to libraryContact us to get information about product availability and its price
