Rawlplug United Kingdom

R-STUDS Metric Threaded Rods - Steel Class 5.8, Hot Dip Galvanized, Flat Head

Threaded rod 5.8 grade steel, hot-dip galvanized (HDG) with increased corrosion resistance, for use with bonded anchors

Threaded rod made of hot dip galvanized steel is suitable for outdoor use and in damp conditions
High-performance bonded anchors offer high load-bearing capacities
Suitable for use with special mesh sleeves in hollow substrates.
Flat head for quick manual installation without a setting tool
Can be post-installed through fixture in some cases. (Consult technical advisory service)
Possibility of removal when used with internally threaded socket

Drill hole to the required diameter and depth for stud size being used.
Clean the hole thoroughly with hand pump and hole brush
If required, insert the mesh sleeve into position
Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product)
Insert the threaded stud slowly and with a slight twisting motion, until the required embedment depth is reached
Leave undisturbed until curing time of resin has elapsed
Attach fixture and tighten the nut to the required installation torque

Need documents for other product? Visit our Technical Library.

go to library

Something went wrong... Please try again.

Your request will be sent to our sales department. Please note this is not a purchase order.

Associated products