Rawlplug United Kingdom

Versatile hammer-in facade fixing with steel nail recommended for ETICS.

Quick and easy installation in all substrates (categories A,B,C,D,E)
Unique sleeve compression zone for precision installations.
Reduced point thermal transmittance to 0.001W/K thanks to high steel nail overmould, which decreases facade heat losses
Highest loads with anchoring zone reduced in length to 25 mm
Excellent plate stiffness (value 1.0 kN/mm) ensures smooth elevation surface and stable insulation system.
Increased head diameter enabling centric hammer driving for improvedinstallation comfort
Pre-assembled components of the fixing allow you to save time

Drill a hole of required diameter and depth
Drilling depth of min 35mm in A,B,C,D materials and 75mm in Aerated Concrete Block.
Clean drilled hole 3 times.
Bottom side of the plate must be flush with the ETICS.
Embedment depth of min 25mm in A,B,C,D materials and 65mm in Aerated Concrete Block.
Hammer the nail into the plastic sleeve until fixing is secure and flush with insulation material.
In soft insulation panels the fixing should be combined with insulation retaining plates KWL-90, KWL-110, KWL-140.

Substrate			A, B, C, D	E	External wall panel of concrete
Hole diameter in substrate	d₀	[mm]	8	8	8
Min. hole depth in substrate	h₀	[mm]	35	75	35
Min. installation depth	h_nom	[mm]	25	65	25
Min. substrate thickness	h_min	[mm]	100	100	40
Min. spacing	s_min	[mm]	100	100	100
Min. edge distance	c_min	[mm]	100	100	100
Fixing diameter	d	[mm]	8	8	8

Need documents for other product? Visit our Technical Library.

go to library

Something went wrong... Please try again.

Your request will be sent to our sales department. Please note this is not a purchase order.

Associated products