Rawlplug United Kingdom

The most effective screw-in facade fixing for countersunk installation with the possibility of surface mounting

Quick and easy installation in all substrates (categories A,B,C,D,E)
Unique sleeve compression zone for precision installations.
Installation with post-installed insulation cap R-TFIX-CAP63 in three versions: R-TFIX-CAP63-EPS-W, R-TFIX-CAP63-EPS-G, R-TFIX-CAP63-EPS-MW reduces heat transmission and results in a homogenous insulation surface
Plate stiffness (value 0.6 kN/mm) ensures smooth elevation surface and stable insulation system.
Unique design allows for high load-bearing capacities. This reduces the quantity of fixings required per square metre of insulation
The shortest embedment depth at the maximum strength parameters
Countersunk installation possible with use of R-TFIX-TOOL-CS or additional R-KWX-063 plate with post-installed R-TFIX-CAP63 insulation cap and system bit R-TFIX-TOOL-BLACK
Installation flush with the surface possible with use of R-TFIX-TOOL-BLACK system bit and post-installed R-TFIX-CAP15 insulation cap
Pre-assembled screw saves time and labour

Drill a hole of required diameter and depth
Drilling depth of min 35mm in A,B,C,D materials and 75mm in Aerated Concrete Block.
Clean drilled hole 3 times.
Insert R-TFIX-TOOL-BLACK into recess in head moulding of R-TFIX-8SX screw.
Insert the fixing into the drilled hole.
When using the KWX-63 the teeth should be embedded in the insulation material after hammering.
Embedment depth of min 25mm in A,B,C,D materials and 65mm in Aerated Concrete Block.
Apply steady axial pressure, ensuring the disc of the setting tool is kept perpendicular to the fixing axis.
Steadily drive in the screw with high revs until fixing is secure (when disc touches insulation surface).

Substrate			A, B, C, D	A - external panel	E
Hole diameter in substrate	d₀	[mm]	8	8	8
Min. installation depth	h_nom	[mm]	25	25	45
Min. hole depth in substrate	h₀	[mm]	35	35	55
Min. hole depth in substrate - countersunk mounting	h₀	[mm]	45	45	65
Min. substrate thickness	h_min	[mm]	100	40	100
Min. spacing	s_min	[mm]	100	100	100
Min. edge distance	c_min	[mm]	100	100	100
Fixing diameter	d	[mm]	8	8	8