Rawlplug United Kingdom

Throughbolt for non-cracked concrete

Technical Data Sheet

R-XPT Throughbolt - Technical Data Sheet

Features and benefits

High performance in non-cracked concrete confirmed by ETA Option 7
High quality with cost effectiveness
Suitable for reduced embedment to avoid contact with reinforcement
Embedment depth markings help to ensure precise installation of the anchor
Design allows drilling and installing directly through the fixture and helps to reduce installation effort
Cold formed body ensures consistent dimensional accuracy
Simple through-installation (drilling and installation through fixed material)
Optimized expander design with six grip features allows for a high load-bearing capacity

Product information

Size	Product Code	Approval type	Anchor		Fixture
			Diameter	Length	Max. thickness t_fixfor:		Hole diameter
			d	L	h_nom,red	h_nom,std	d_f
		-	[mm]	[mm]	[mm]	[mm]	[mm]
M6	R-XPT-06050/10	AT-15-9327/14	6	50	10	-	7
	R-XPT-06065/5	AT-15-9327/14	6	65	25	5	7
	R-XPT-06085/25	AT-15-9327/14	6	85	45	25	7
	R-XPT-06100/40	AT-15-9327/14	6	100	60	40	7
M8	R-XPT-08050/5	AT-15-9327/14	8	50	5	-	9
	R-XPT-08060/10	ETA 17/0183	8	60	10	-	9
	R-XPT-08065/15	ETA 17/0183	8	65	15	-	9
	R-XPT-08075/10	ETA 17/0183	8	75	25	10	9
	R-XPT-08080/15	ETA 17/0183	8	80	30	15	9
	R-XPT-08085/20	ETA 17/0183	8	85	35	20	9
	R-XPT-08095/30	ETA 17/0183	8	95	45	30	9
	R-XPT-08115/50	ETA 17/0183	8	115	65	50	9
	R-XPT-08140/75	ETA 17/0183	8	140	90	75	9
	R-XPT-08150/85	ETA 17/0183	8	150	100	85	9
M10	R-XPT-10065/5	ETA 17/0183	10	65	5	-	12
	R-XPT-10080/10	ETA 17/0183	10	80	20	10	12
	R-XPT-10095/25	ETA 17/0183	10	95	35	25	12
	R-XPT-10115/45	ETA 17/0183	10	115	55	45	12
	R-XPT-10130/60	ETA 17/0183	10	130	70	60	12
	R-XPT-10140/70	ETA 17/0183	10	140	80	70	12
	R-XPT-10150/80	ETA 17/0183	10	150	90	80	12
	R-XPT-10180/110	ETA 17/0183	10	180	120	110	12
M12	R-XPT-12080/5	ETA 17/0183	12	80	5	-	14
	R-XPT-12100/5	ETA 17/0183	12	100	25	5	14
	R-XPT-12120/25	ETA 17/0183	12	120	45	25	14
	R-XPT-12125/30	ETA 17/0183	12	125	50	30	14
	R-XPT-12135/40	ETA 17/0183	12	135	60	40	14
	R-XPT-12140/45	ETA 17/0183	12	140	65	45	14
	R-XPT-12150/55	ETA 17/0183	12	150	75	55	14
	R-XPT-12160/65	ETA 17/0183	12	160	85	65	14
	R-XPT-12180/85	ETA 17/0183	12	180	105	85	14
	R-XPT-12200/105	ETA 17/0183	12	200	125	105	14
	R-XPT-12220/125	ETA 17/0183	12	220	145	125	14
	R-XPT-12250/155	ETA 17/0183	12	250	175	155	14
	R-XPT-12280/185	ETA 17/0183	12	280	205	185	14
M16	R-XPT-16090/10	-	16	90	0	0	18
	R-XPT-16100/5	ETA 17/0183	16	100	5	-	18
	R-XPT-16105/10	ETA 17/0183	16	105	10	-	18
	R-XPT-16125/5	ETA 17/0183	16	125	25	5	18
	R-XPT-16140/20	ETA 17/0183	16	140	40	20	18
	R-XPT-16150/30	ETA 17/0183	16	150	50	30	18
	R-XPT-16160/40	ETA 17/0183	16	160	60	40	18
	R-XPT-16180/60	ETA 17/0183	16	180	80	60	18
	R-XPT-16200/80	ETA 17/0183	16	200	100	80	18
	R-XPT-16220/100	ETA 17/0183	16	220	120	100	18
	R-XPT-16250/130	ETA 17/0183	16	250	150	130	18
	R-XPT-16280/160	ETA 17/0183	16	280	180	160	18
	R-XPT-16300/180	ETA 17/0183	16	300	200	180	18
M20	R-XPT-20125/5	ETA 17/0183	20	125	5	-	22
	R-XPT-20160/20	ETA 17/0183	20	160	40	20	22
	R-XPT-20200/60	ETA 17/0183	20	200	80	60	22
	R-XPT-20250/110	ETA 17/0183	20	250	130	110	22
	R-XPT-20300/160	ETA 17/0183	20	300	180	160	22
M24	R-XPT-24180/20	AT-15-9327/14	24	180	35	20	26
	R-XPT-24260/100	AT-15-9327/14	24	260	115	100	26
	R-XPT-24300/140	AT-15-9327/14	24	300	155	140	26

Base material

Non-cracked concrete C20/25-C50/60
Unreinforced concrete
Reinforced concrete

For use also with

Natural Stone (after site testing)

Applications

Cladding restraint
Curtain wall
Balustrading
Barriers
Handrails
Racking
Structural steel
Bollards

Installation guide

Drill a hole of required diameter and depth
Clear the hole of drilling dust and debris (using blowpump or equivalent method)
Lightly tap the throughbolt through the fixture into hole with a hammer, until fixing depth is reached
Tighten to the recommended torque

Installation data

Size			M6	M8	M10	M12	M16	M20	M24
Thread diameter	d	[mm]	6	8	10	12	16	20	24
Hole diameter in substrate	d₀	[mm]	6	8	10	12	16	20	24
Installation torque	T_inst	[Nm]	5	15	30	50	100	200	300
Wrench size	Sw	[mm]	10	13	17	19	24	30	36
External diameter of washer		[mm]	12	16	20	24	30	37	44
STANDARD EMBEDMENT DEPTH
Min. hole depth in substrate	h_0,s	[mm]	55	65	69	90	110	129	140
Min. installation depth	h_nom,s	[mm]	50	55	59	80	100	119	135
Min. substrate thickness	h_min,s	[mm]	84	100	100	136	170	198	224
Min. spacing	s_{min, s}	[mm]	45	50	55	75	90	140	180
Min. edge distance	c_{min, s}	[mm]	50	40	50	65	80	100	200
REDUCED EMBEDMENT DEPTH
Min. hole depth in substrate	h_0,r	[mm]	35	50	59	70	90	110	125
Min. installation depth	h_nom,r	[mm]	30	40	49	60	80	100	120
Min. substrate thickness	h_min,r	[mm]	80	100	100	100	130	158	194
Min. spacing	s_min,r	[mm]	40	45	55	100	100	125	160
Min. edge distance	c_min,r	[mm]	45	40	65	100	100	125	160