Rawlplug United Kingdom

Versatile hammer-in facade fixing with steel nail recommended for ETICS.

Simple installation in all standard substrates (A,B,C).
Excellent plate stiffness (value 1.0 kN/mm) ensures smooth elevation surface and stable insulation system.
The long plastic overmoulding on the TFIX-8M nail minimises thermal bridging (value 0.002W/K), contributing to energy-saving benefits.
Unique nail design allows for high load-bearing capacities. This reduces the quantity of fixings required per square metre of insulation.
The shortest embedment depth at the maximum strength parameters
Pre-assembled expansion nail saves time and labour.
Can be used with additional KWL insulation holding plate, available in 90, 110 and 140mm flange sizes (recommended for soft insulation materials such as mineral wool).

Drill a hole of required diameter and depth
Drilling depth of min 35-45mm in approved materials
Lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached and plastic sleeve flush with insulation material
Embedment depth of min 25mm in approved materials
Hammer the nail into the plastic sleeve until fixing is secure and flush with insulation material.
In soft insulation panels the fixing should be combined with insulation retaining plates KWL-90, KWL-110, KWL-140.

Need documents for other product? Visit our Technical Library.

go to library

Something went wrong... Please try again.

Your request will be sent to our sales department. Please note this is not a purchase order.

Associated products